Ultra-brite LED turn signals with flexible mounting and the KTM factory connectors for direct plug in installation. Includes a small window on the tip of the turn signal for increased visibility. Shaped similar to the factory KTM EXC turn signal only smaller and more flexible.

These turn signals are labeled with the E mark on the lens (ECE approved).

FITS:
• 2007-22 KTM EXC (SEE NOTE BELOW)
• 2014-16 Husqvarna FE-S Models (SEE NOTE BELOW)
• 2017-19 Husqvarna FE Models (SEE NOTE BELOW)
• 2020-22 Husqvarna FE-S Models (SEE NOTE BELOW)


FITS:
• 2007-22 KTM EXC (SEE NOTE BELOW)
• 2014-16 Husqvarna FE-S Models (SEE NOTE BELOW)
• 2017-19 Husqvarna FE Models (SEE NOTE BELOW)
• 2020-22 Husqvarna FE-S Models (SEE NOTE BELOW)


NOTE:
• If installing on a 07-22 KTM EXC, a 2014-16 Husqvarna FE-S, a 2017-19 Husqvarna FE, or a 2020 Husqvarna FE-S you may also need parts  22-298  and  22-300. (SEE BELOW)
•  
• * If you plan to use LED turn signals on the front  AND  rear, then you will need to install the  22-298    AND  the  22-300. 
•  
• * If running one set of LED and one set of standard bulb turn signals you do not need the  22-298  nor are you required to install the  22-300  smart flasher. 
  In this case the turn signals will blink slightly faster. If you wish to correct the flash rate install the  22-300.